方亮 |
料磨损理论
摩擦学与摩擦学材料
高分子泡沫材料数控加工技术
材料加工过程中的传热传质现象
锂离子及太阳能电池材料
1981年西安交通大学本科毕业,获工学学士学位;
1984年西安交通大学硕士毕业,获工学硕士学位;
1991年哈尔滨工业大学毕业,获工学博士学位。
1997年英国国家物理实验室访问学者;
2000年德国Karlsruhe大学及FZK访问学者;
2003年日本庆应大学访问教授;
2005-2010年中国矿业大学特聘教授;
2010-2014年华侨大学厦门工学院院长。
荷兰Elsevier Group PLC.出版集团Wear杂志编委;美国John Wiley & Sons, Inc.出版集团Lubrication Science杂志编委;摩擦学学报杂志编委。机械工程学会摩擦学分会委员;机械工程学会高级会员。1997年获教育部科技进步三等奖; 2003年获陕西省科技进步二等奖;2001年获国家级教学成果二等奖。2000年教育部青年骨干教师获得者;2000年王宽诚教育基金会育才奖获得者;2006年西安交通大学国尾武青年科技奖获得者;中国科学院兰州化学物理研究所优秀科技工作者及机械工程学会先进组织工作奖。撰写国家级优秀教材一本,国家规划教材两本。截止2015年发表SCI收录论文81篇(H-Index 13,他引文献472篇)。
国家自然科学基金项目: MEMS中的纳米三体磨料磨损(51375364)
国家自然科学基金项目:超高速下干滑动摩擦磨损特性(51475359)
发表学术论文:
1. Li, Wangnan; Cai, Hongneng; Li, Chao; Wang, Kaixin ; Fang, Liang, Micro-mechanics of failure for fatigue strength prediction of bolted joint structures of carbon fiber reinforced polymer composite, COMPOSITE STRUCTURES, Vol.124, pp345-356, 2015
2. Sun, Jiapeng; Fang, Liang ; Ma, Aibin ; Jiang, Jinghua ; Han, Ying ; Chen, Huawei ; Han, Jing, The fracture behavior of twinned Cu nanowires: A molecular dynamics simulation, MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, Vol. 634,pp 86-90, 2015
3. Li, Wangnan; Cai, Hongneng; Li, Chao; Wang, Kaixin; Fang, Liang, Progressive failure of laminated composites with a hole under compressive loading based on micro-mechanics, ADVANCED COMPOSITE MATERIALS, Vol. 23, No. 5-6, pp477-490 特刊: SI, 2014
4. Li, Bo; Fang, Liang; Sun, Kun, Variance of Particle Size: Another Monitor to Evaluate Abrasive Wear, TRIBOLOGY LETTERS, Vol.55, No.3, pp465-472, 2014
5. Sun, Jiapeng; Fang, Liang; Han, Jing; Han, Ying; Chen, Huwei; Sun, Kun, Phase transformations of mono-crystal silicon induced by two-body and three-body abrasion in nanoscale, COMPUTATIONAL MATERIALS SCIENCE, Vol.82, pp140-150, 2014
6. Sun, JP; Fang, L; Han, J; Han, Y; Chen, HW ; Sun, K, Phase transformations of mono-crystal silicon induced by two-body and three-body abrasion in nanoscale, COMPUTATIONAL MATERIALS SCIENCE, Vol. 82pp140-150,2013
7. Sun, JP; Fang, L; Han, J; Han, Y ; Chen, HW ; Sun, K, Abrasive wear of nanoscale single crystal silicon, WEAR, Vol. 307No. 1-2,pp119-126, 2013
8. Zhao, J; Xiong, SM; Bogy, DB ; Sun, K; Fang, L, Hard-particle-induced physical damage and demagnetization in the head-disk interface, MICROSYSTEM TECHNOLOGIES-MICRO-AND NANOSYSTEMS-INFORMATION STORAGE AND PROCESSING SYSTEMS, Vol. 19, No. 9-10, pp1313-1317, Spec,2013
9. Sun, K; Fang, L; Yan, ZY ; Sun, JP, Atomistic scale tribological behaviors in nano-grained and single crystal copper systems, WEAR, Vol. 303, No. 1-2, pp191-201, 2013
10. Han, J; Fang, L; Sun, JP; Han, Y; Sun, K, Length-dependent mechanical properties of gold nanowires, JOURNAL OF APPLIED PHYSICS, Vol. 112, No. 11, Ref. No.114314, 2012
11. Wu Tonghai; Diao Dongfeng; Fang Liang, Abrasive Wear Mechanisms of Sand Particles Intruding into ATM Roller-scraper Tribosystem, CHINESE JOURNAL OF MECHANICAL ENGINEERING Vol. 24, No. 5, pp905-910, DOI: 10.3901/CJME.2011.05.905,SEP 2011
12. Sun, JP; Fang, L ; Sun, K ; Han, J, Direct observation of dislocations originating from perfect twin boundaries, SCRIPTA MATERIALIA, Vol. 65, No. 6, pp501-504, 2011
13. Sun, K ; Fang, L; Yan, WL; Li, B; Wang, YQ, Kinetics of Surface Nanocrystallization for Hadfield Steel in Shot Peening, ADVANCED SCIENCE LETTERS, Vol. 4, No. 4-5, pp1862-1866, 2011
14. Sun, K; Li, B ; Fang, L; Ye, QG, A novel rapid prototyping system for expandable polystyrene, RAPID PROTOTYPING JOURNAL, Vol. 17, No. 1, pp17-27, 2011
15. :Han, J; Fang, L; Sun, JP; Wang, YQ ; Ge, SR; Zhu, H, Hydrodynamic Lubrication of Surfaces with Asymmetric Microdimple, TRIBOLOGY TRANSACTIONS, Vol. 54, No. 4, pp607-615, 2011
16. Sun, Jiapeng; Fang, Liang; Han, Jing, Optimization of concrete hollow brick using hybrid genetic algorithm combining with artificial neural networks, INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER, Vol. 53, No. 23-24, pp5509-5518, 2010
17. Fang, L; Zhao, J; Li, B ; Sun, K, Movement patterns of ellipsoidal particle in abrasive flow machining, JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, Vol. 209, No. 20, pp6048-6056, 2009
18. Fang, L; Li, B; Zhao, J; Sun, K, Computer simulation of the two-body abrasion process modeling the particle as a paraboloid of revolution, JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, Vol. 209, No. 20, pp6124-6133, 2009
19. Yan, WL; Fang, L; Zheng, ZG; Sun, K; Xu, YH, Effect of surface nanocrystallization on abrasive wear properties in Hadfield steel, TRIBOLOGY INTERNATIONAL, Vol. 42, No. 5, pp634-641, 2009
20. Fang, L; Zhao, J; Sun, K; Zheng, DG; Ma, DX, Temperature as sensitive monitor for efficiency of work in abrasive flow machining, WEAR, Vol. 266, No. 7-8, pp678-687, 2009
21. Liang, SH; Wang, XH; Fang, L; Fan, ZK, Relationship between powder characteristic and internal oxidation of Al in Cu-Al pre-alloyed powders, ACTA METALLURGICA SINICA-ENGLISH LETTERS, Vol. 22, No. 1, pp71-80, DOI: 10.1016/S1006-7191(08)60073-3,FEB 2009
22. Xu, YH; Peng, JH; Fang, L, Nano-crystallization of steel wire and its wear behavior, MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, Vol. 483-84, pp688-691, Spec,2008
23. Zhang, WH; Fang, L; Yue, M; Yu, ZL, Improved electrochemical performance of modified natural graphite anode for lithium secondary batteries, JOURNAL OF POWER SOURCES, Vol. 174, No. 2, pp766-769, 2007
24. Yan, WL; Fang, L; Sun, K; Xu, YH, Effect of surface work hardening on wear behavior of Hadfield steel, MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, Vol. 460, pp542-549, 2007
25. Yan, WL; Fang, L; Sun, K; Xu, YH, Thermodynamics of nanocrystilline formation in surface layer of Hadfield steel by shot peening, MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, Vol. 445, pp392-397, 2007
26. Lin, RH; Fang, L; Li, XP; Xi, YX; Zhang, SF, Synthesis and properties of novel phenolic resins modified with nanosized copper particles, POLYMER INTERNATIONAL, Vol. 55, No. 11, pp1249-1253, 2006
27. Lin, RH; Fang, L; Li, XP; Zhang, SF, Phenolic resins modified by nanocopper particles and their service performances, POLYMER-PLASTICS TECHNOLOGY AND ENGINEERING, Vol. 45, No. 11, pp1243-1249, 2006
28. Lin, RH; Fang, L; Li, XP; Xi, YX; Zhang, SF; Sun, P, Study on phenolic resins modified by copper nanoparticles, POLYMER JOURNAL, Vol. 38, No. 2, pp178-183, 2006
29. Fang, L; Xu, YH; Cen, QH; Zhu, JH, Impact wear behaviors of Hadfield manganese steel, JOURNAL OF CENTRAL SOUTH UNIVERSITY OF TECHNOLOGY, Vol. 12, No. 2, pp150-154,APR 2005
30. Xu, YH; Fang, L; Cen, QH; Zhu, ZH, Subsurface microstructure evolution of hadfield steel under high impact energy, PRICM 5: THE FIFTH PACIFIC RIM INTERNATIONAL CONFERENCE ON ADVANCED MATERIALS AND PROCESSING, PTS 1-5, Series: MATERIALS SCIENCE FORUM, Vol. 475-479, pp117-120, 子辑: 1-5,2005
31. Cen, Q ; Xu, YH; Fang, L; Zhu, JH, Wear mechanism of nano-structured surface layer under high impact energy, PRICM 5: THE FIFTH PACIFIC RIM INTERNATIONAL CONFERENCE ON ADVANCED MATERIALS AND PROCESSING, PTS 1-5 丛书: MATERIALS SCIENCE FORUM, Vol. 475-479, pp4187-4190, 子辑: 1-5,2005
32. Fang, L; Cen, QH; Sun, K; Liu, WM; Zhang, XF; Huang, ZF, FEM computation of groove ridge and Monte Carlo simulation in two-body abrasive wear, WEAR, Vol. 258, No. 1-4, pp265-274, 2005
33. Lin, RH; Fang, L; Xi, YX; Shao, YX, Preparation of nano-particle copper by chemical reduction, ACTA CHIMICA SINICA, Vol. 62, No. 23, pp2365-2368,DEC 14 2004
34. Li, XB; Gao, YM ; Xing, JD; Wang, Y; Fang, L, Wear reduction mechanism of graphite and MoS2 in epoxy composites, WEAR, Vol. 257, No. 3-4, pp279-283, 2004
35. Zhang, AF; Xing, JD; Fang, L; Su, JY, Inter-phase corrosion of chromium white cast irons in dynamic state, WEAR, Vol. 257, No. 1-2, pp198-204, 2004
36. Liang, SH; Fang, L; Fan, ZK, Internal oxidation of Cr in Cu-Cr/Cu2O composite powder prepared by mechanical activation, MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, Vol. 374, No. 1-2, pp27-33, 2004
37. Liang, SH; Fang, L ; Fan, ZK, Effect of powder characteristics on Cr internal oxidation for preparation of Cr2O3/Cu composite, MATERIALS SCIENCE AND TECHNOLOGY, Vol. 20, No. 6, pp800-803, 2004
38. Fang, L; Liu, WM; Du, DS; Zhang, XF; Xue, QJ, Predicting three-body abrasive wear using Monte Carlo methods, WEAR, Vol. 256, No. 7-8, pp685-694, DOI: 10.1016/S0043-1648(03)00464-2,APR 2004
39. Liang, SH; Xu, L; Fang, L; Fan, ZK, Analysis on internal oxidation technology of Al in Cu-Al pre-alloyed powders, ACTA METALLURGICA SINICA, Vol. 40, No. 3, pp309-313,MAR 2004
40. Liang, SH; Fan, ZK; Xu, L; Fang, L, Kinetic analysis on Al2O3/Cu composite prepared by mechanical activation and internal oxidation, COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING, Vol. 35, No. 12, pp1441-1446, 2004
41. Liang, SH; Fan, ZK; Fang, L, Effect of powder characteristic on Al internal oxidation to prepare Al2O3-Cu composite, JOURNAL OF COMPOSITE MATERIALS, Vol. 38, No. 1, pp31-39, 2004
42. Liang, SH; Fang, L; Xu, L; Fan, ZK, Effect of Al content on the properties and microstructure of Al2O3-Cu composite prepared by internal oxidation, JOURNAL OF COMPOSITE MATERIALS, Vol. 38, No. 17, pp1495-1504, 2004
43. Zhang, XF; Fang, L, The effect of stacking fault energy on the cavitation erosion resistance of alpha-phase aluminum bronzes, WEAR, Vol. 253, No. 11-12, pp1105-1110, Ref. No.PII S0043-1648(02)00168-0, 2002
44. Dulias, U; Fang, L; Zum Gahr, KH, Effect of surface roughness of self-mated alumina on friction and wear in isooctane-lubricated reciprocating sliding contact, WEAR, Vol. 252, No. 3-4, pp351-358, Ref. No.PII S0043-1648(01)00900-0, 2002
45. Fang, L; Xing, JD; Liu, WM; Xue, QJ; Wu, GQ; Zhang, XF, Computer simulation of two-body abrasion processes, WEAR, Vol. 251, pp1356-1360, 子辑: 2, 2001
46. Gao, YM; Ma, XJ; Fang, L; Zhang, XF; Su, JY, The effect of inhibitors on the corrosion and tribological characteristics of gray iron sliding against Si3N4 under lubricated conditions, WEAR, Vol. 248, No. 1-2, pp1-6, 2001
47. Fang, L; Gao, YM; Zhang, Z, Tribology of Si3N4 with different glassy phase content sliding against grey cast iron lubricated with water, WEAR, Vol. 225, pp896-904, 子辑: 2, 1999
48. Fang, L; Gao, YM ; Si, SH; Zhou, QD, Effect of graphitized cast irons hardness on wear of ceramics, WEAR, Vol. 221, No. 1, pp55-60, 1998
49. Fang, L; Zhou, QD; Li, QC, An experimental simulation of cutting wear in three-body abrasion, WEAR, Vol. 219, No. 2, pp188-194, 1998
50. Gao, YM; Fang, L; Su, JY; Xu, XW, An investigation on component and formation of tribochemical film in Si3N4-white iron sliding pair lubricated with distilled water, TRIBOLOGY INTERNATIONAL, Vol. 30, No. 9, pp693-700, 1997
51. Gao, YM; Fang, L; Su, JY, The effect of tribofilm formation on the tribological characteristics of ceramic cast iron sliding pairs, WEAR, Vol. 210, No. 1-2, pp1-7, 1997
52. Gao, YM; Fang, L; Su, JY; Xie, ZG, Investigation on the components and the formation of a tribochemical film in the Si3N4 gray iron sliding pair lubricated with distilled water, WEAR, Vol. 206, No. 1-2, pp87-93, 1997
53. ZHOU, L; FANG, L; WANG, NX; ZHOU, JE, UNLUBRICATED SLIDING WEAR MECHANISM OF FINE CERAMIC SI3N4 AGAINST HIGH-CHROMIUM CAST-IRON, TRIBOLOGY INTERNATIONAL, Vol. 27, No. 5, pp349-357, 1994
54. FANG, L; GAO, YM; ZHOU, L; LI, P, UNLUBRICATED SLIDING WEAR OF CERAMICS AGAINST GRAPHITIZED CAST IRONS, WEAR, Vol. 171, No. 1-2, pp129-134,JAN 1994
55. FANG, L; KONG, XL; SU, JY; ZHOU, QD, MOVEMENT PATTERNS OF ABRASIVE PARTICLES IN 3-BODY ABRASION, WEAR, Vol. 162, pp782-789, 子辑: B, 1993
56. FANG, L; KONG, XL; ZHOU, QD, A WEAR TESTER CAPABLE OF MONITORING AND EVALUATING THE MOVEMENT PATTERN OF ABRASIVE PARTICLES IN 3-BODY ABRASION, WEAR, Vol. 159, No. 1, pp115-120,NOV 2 1992
57. Liang Fang, Qichang Rao and Qingde Zhou, Abrasive wear resistance of chromium family of white cast irons, Proceedings International Conference on Wear of Materials, ASME,1987,733-741
58. Liang Fang,Qichang Rao and Qingde Zhou, Wear and fracture of Cr-family white cast irons, Acta Metallurgica, Sinica, 23(1987)B305-B310
59. Liang Fang, Qingde Zhou and Yaojun Li, An explanation of the relation between wear and material hardness in three-body abrasion,Proceedings International Conference on Wear of Materials,ASME,1991,513-520 and Wear,151(1991)313-321
60. Li, Y; Zhuang, QC; Wang, HT; Xu, XQ; Qiang, YH; Fang, L, Impedance analysis for dye-sensitized solar cells based on TiO2 electrode coated with Cr2O3, SUPERLATTICES AND MICROSTRUCTURES, Vol. 61, pp152-159, 2013
61. Zhang, HZ; Fang, L; Zhou, YG ; Shi, GL, Microstructures and Corrosion Properties of Nanocrystalline Cu Coatings Synthesized by Electroless Plating, RARE METAL MATERIALS AND ENGINEERING, Vol. 41, pp239-242, 增刊: 2,SEP 2012
62. Hu, NN; Ge, SR; Fang, L, Tribological properties of nano-porous anodic aluminum oxide template, JOURNAL OF CENTRAL SOUTH UNIVERSITY OF TECHNOLOGY, Vol. 18, No. 4, pp1004-1008, 2011
63. Han, QG; Zhang, HZ; Fang, L; Wang, YQ, Tribological Properties of Nanocrystalline Cu Coatings Produced by Electroless Plating under Various Lubrication Conditions, RARE METAL MATERIALS AND ENGINEERING, Vol. 40, pp356-359, 增刊: 2,JUL 2011
64. Xu, SD; Zhuang, QC; Tian, LL; Qin, YP; Fang, L; Sun, SG, Impedance Spectra of Nonhomogeneous, Multilayered Porous Composite Graphite Electrodes for Li-Ion Batteries: Experimental and Theoretical Studies, JOURNAL OF PHYSICAL CHEMISTRY C, Vol. 115, No. 18, pp9210-9219, 2011
65. Yang, HF; Wang, YQ; Fang, L ; Ge, SR, Laser Processing Technique of Stainless Steel Surface Nanotexture, ADVANCED SCIENCE LETTERS, Vol. 4, No. 3, pp891-894, 2011
66. Hao, JB; Fang, L; Wang, JY, An Efficient Slicing Algorithm for Asynchronous linear hotwire cutting system of Expandable polystyrene foam, FUNCTIONAL MANUFACTURING TECHNOLOGIES AND CEEUSRO II, 丛书: Key Engineering Materials, Vol. 464, pp199-203, 2011
67. Wang, YQ; Yang, HF; Hao, JB; Han, QG; Fang, L; Ge, SR, Experimental Research on the Fabrication and Wettability of Micro- and Nano-scale Surface Textures Produced on Stainless Steel Using an Ultrafast Laser, LASERS IN ENGINEERING, Vol. 21, No. 3-4, pp241-254,2011
68. Hao, JB; Fang, L; Williams, RE, An efficient curvature-based partitioning of large-scale STL models, RAPID PROTOTYPING JOURNAL, Vol. 17, No. 2, pp116-127, 2011
69. Yang, HF; Wang, YQ; Liu, L; Fang, L; Ge, SR, Experimental investigation on nanoprocessing of stainless steel surface, MATERIALS PROCESSING TECHNOLOGIES, PTS 1 AND 2, Series: Advanced Materials Research, Vol. 154-155, pp987-990, 2011
70. Wang, YQ; Yang, HF; Han, QG; Fang, L; Ge, SR, Tribological and Lubrication Properties of Sandblast-textured Surfaces with Varied Roughness, MATERIALS PROCESSING TECHNOLOGIES, PTS 1 AND 2, Series: Advanced Materials Research, Vol. 154-155, pp1019-1022, 2011
71. Tian, LL; Zhuang, QC; Wang, R; Cui, YL; Fang, L; Qiang, YH, Effects of Li2CO3 Additive on the Performance of Graphite Electrode, CHEMICAL JOURNAL OF CHINESE UNIVERSITIES-CHINESE, Vol. 31, No. 12, pp2468-2473,DEC 10 2010
72. Wei, FX; Huang, Y; Fang, L, Low-voltage and high-efficiency white organic light emitting devices with carrier balance, PHYSICA B-CONDENSED MATTER, Vol. 405, No. 21, pp4434-4438, 2010
73. Wei, T; Zhuang, QC; Wu, C; Cui, YL; Fang, L; Sun, SG, Effects of Temperature on the Intercalation-Deintercalation Process of Lithium Ion in the Spinel LiMn2O4, ACTA CHIMICA SINICA,Vol. 68, No. 15, pp1481-1486,AUG 14 2010
74. Wei, FX; Fang, L; Huang, Y, Synthesis, characterization, crystal structures, and photophysical properties of a series of room-temperature phosphorescent copper(I) complexes with oxadiazole-derived diimine ligand, INORGANICA CHIMICA ACTA, Vol. 363, No. 11, pp2600-2605, 2010
75. Qiu, XY; Zhuang, QC; Wang, HM; Cui, YL; Fang, L; Sun, SG, Influence of Electrolyte Composition on the Intercalation-Deintercalation Process of Lithium Ion in Spinel LiMn2O4, ACTA PHYSICO-CHIMICA SINICA, Vol. 26, No. 6, pp1499-1506, 2010
76. Zhuang, QC; Xu, SD; Qiu, XY; Cui, YL; Fang, L; Sun, SG, Diagnosis of Electrochemical Impedance Spectroscopy in Lithium Ion Batteries, PROGRESS IN CHEMISTRY, Vol. 22, No. 6, pp1044-1057,JUN 2010
77. Zhuang, QC; Wei, T; Du, LL; Cui, YL; Fang, L; Sun, SG, An Electrochemical Impedance Spectroscopic Study of the Electronic and Ionic Transport Properties of Spinet LiMn2O4, JOURNAL OF PHYSICAL CHEMISTRY C, Vol. 114, No. 18, pp8614-8621, 2010
78. Wei, FX; Fang, L; Huang, Y, Low-voltage and high-efficiency stacked white organic light-emitting diodes, OPTOELECTRONICS AND ADVANCED MATERIALS-RAPID COMMUNICATIONS, Vol. 4, No. 5, pp620-623,MAY 2010
79. Hao, JB; Williams, RE; Fang, L; Xu, RP, Research on Knowledge Fermenting in Product Innovation, 2009 IEEE INTERNATIONAL CONFERENCE ON INDUSTRIAL ENGINEERING AND ENGINEERING MANAGEMENT, VOLS 1-4, 丛书: International Conference on Industrial Engineering and Engineering Management IEEM, pp1890-1894, 2009
80. Wang, YQ; Wu, GF; Han, QG; Fang, L; Ge, SR, Tribological properties of surface dimple-textured by pellet-pressing, PROCEEDINGS OF THE INTERNATIONAL CONFERENCE ON MINING SCIENCE & TECHNOLOGY (ICMST2009), 丛书: Procedia Earth and Plantetary Science, Vol. 1, No. 1, pp1513-1518, 2009
81. Wei, FX; Fang, L, Pure-blue tandem OLEDs based on terfluorenes compounds, JOURNAL OF MATERIALS SCIENCE-MATERIALS IN ELECTRONICS, Vol. 19, No. 12, pp1202-1205, 2008
申请国家发明专利:
邢建东; 王恩泽; 方亮; 高义民,一种局部复合材料及其制造方法(CN1128297)
方亮; 郝敬宾; 孙琨; 王治国; 岑启宏; 齐笑冰,双金属复合弯管的聚苯乙烯泡沫塑料模样的制造方法(CN102145374A)
方亮; 王延庆; 孙琨; 王治国; 岑启宏; 齐笑冰,一种用于固体物料输送管的高流动性高耐磨性合金材料(CN102146546A)
方亮; 闫转芳; 阮友亮; 孙甲鹏; 孙琨,一种适用于大功率LED灯散热器的散热片(CN103939870A)
方亮; 孙琨; 蔡洪能; 徐学武; 龚道明; 叶庆光,合金热丝为刀具的泡沫高分子材料三维快速成形方法及装置(CN1935473)
方亮; 王延庆; 庄全超; 郝敬宾; 李艳; 王洪涛; 高节,一种自润滑复合材料的微波烧结方法(CN101518821B)
科技成果奖:
方亮,高义民,磨料磨损及腐蚀磨损机理, 1997年获国家教育部科技进步三等奖
高义民,方亮,陶瓷与铸铁配副的滑动摩擦磨损,1997年获陕西省科技进步二等奖