设为首页|English Version
当前位置: 首页 >> 师资队伍
教师内容页
赵万华  
研究领域(方向)

1.高速、超高速加工工艺及装备

机床精度设计理论与方法

机电耦合理论与机电集成设计方法

机床动态性能主动设计理论与方法

机床热变形分析与误差补偿技术

2.超高速切削材料去除机理

基于应力波理论的材料去除机制研究
个人及工作简历

1.教育经历

1994.9-1998.5,西安交通大学,机械工程学院,博士

1988.9-1991.5,西安交通大学,机械工程学院,硕士

1982.9-1986.7,西安交通大学,机械工程学院,学士

2.科研与学术工作经历

1998.5- 至今,西安交通大学机械工程学院,讲师、副教授、教授、博导

1998.9-2001.3,浙江大学机械工程学院,博士后

1991.5-1994.8,西安交通大学机械系机制教研室,助教、讲师

1986.7-1988.9,西安交通大学机械系机制教研室,助教

1982.9-1986.7,西安交通大学机械系机械制造专业本科学习

3.海外经历

2006.7,新加坡国立大学,高级访问学者

2009.4,澳大利亚,参观学习访问

2008.9,德国自由、洪堡、慕尼黑大学,参观学习访问

2010.10,美国爵硕大学、密歇根大学,学习访问

2011.9,德国柏林工业大学,学习交流洽谈合作

科研项目

1.复杂机电系统多维频谱特征建模与集成设计方法,自然科学基金重点项目(编号:51235009),280万,2013.1-2017.12。

2.精密数控机床精度保持性技术研究(编号:2010ZX04014-015),工信部04专项,452万,2010.1-2013.6。

3.高速复合数控机床及关键技术创新平台(编号:2011ZX04016),工信部04专项,142万,2011.1-2013.12。

4.超高速加工及其装备的基础研究(编号:2009CB724400),973计划,3800万,2009.1-2013.8。                                                        

5.西安交通大学高端制造装备协同创新中心重庆联合实验室及产业化基地(项目编号:20160324),重庆永川工业园区凤凰湖管理委员会,1200万,2016.1-2020.12

6.智能制造实验研究平台的设计与开发(项目编号:20170574),天津中德应用技术大学,160万,2017.5-2018.4.

7.QJK007/QMK009A综合性能分析及测试(项目编号:20160749),秦川机床工具集团股份公司,50万,2016.4-2016.8.

8.典型长桁零件装夹设计及切削技术研究(编号:20140807-1),中航飞机股份有限公司西安飞机分公司,27.5万,2014.6-2015.2.

9.CY-CTC63150高刚性数控车床有限元分析及测试(编号:20141047-1),云南CY集团有限公司,9万,2014.9-2016.9.

学术及科研成果、专利、论文

论文

1.       Integrated modeling and analysis of ball screw feed system and milling process with consideration of multi-excitation effect [J]. Mechanical Systems and Signal Processing, 2018, 98: 484-505. Zhang Xing, Zhang Jun*, Zhang Wei, Liang Tao, Liu Hui, Zhao Wanhua.

2.       Analysis on the multi-dimensional spectrum of the thrust force for the linear motor feed drive system in machine tools [J]. Mechanical Systems and Signal Processing, 2017, 82:68-79. Yang Xiaojun, Lu Dun, Ma Chengfang, Zhang Jun, Zhao Wanhua*.

3.       Feed fluctuation of ball screw feed systems and its effects on part surface quality [J]. International Journal of Machine Tools and Manufacture, 2016, 101:1-9. Liang Tao; Lu Dun; Yang Xiaojun; Zhang Jun; Ma Xiaobo; Zhao Wanhua*. (SCI, IF=3.995).

4.       An accurate prediction method of cutting forces in 5-axis flank milling of sculptured surface [J]. International Journal of Machine Tools and Manufacture, 2016, 104:26-36. Zhang Xing, Zhang Jun, Pang Bo, Zhao Wanhua*.

5.       Research on the dynamics of ball screw feed system with high acceleration [J]. International Journal of Machine Tools and Manufacture, 2016, 111:9-16. Zhang Jun*, Zhang Huijie, Du Chao, Zhao Wanhua. (SCI, IF=3.995).

6.       Nonlinear propagation of stress waves during high speed cutting [J]. Applied Physics Letters, 2016,109(19):191904. Jiang Yifei, Zhang Jun*, He Yong, Liu Hongguang, Zhao Wanhua. (SCI, IF=3.411).

7.       Receptance coupling of multi-subsystem connected via a wedge mechanism with application in the position-dependent dynamics of ball screw drives [J]. Journal of Sound and Vibration, 2016, 376:166-181. Liu Hui, Lu Dun, Zhang Jun, Zhao Wanhua*.

8.       Thermal Characteristics of Water-Lubricated Ceramic Hydrostatic Hydrodynamic Hybrid Bearings [J]. Tribology Letters, 2016,63. Lu Dun*, Liu Kejia, Zhao Wanhua, Lu Bingheng.

9.       Investigation on the displacement fluctuation of the linear motor feed system considering the linear encoder vibration [J]. International Journal of Machine Tools and Manufacture, 2015, 98:33-40. Yang Xiaojun; Lu Dun; Zhang Jun; Zhao Wanhua*.(SCI, IF=3.995).

10.   A review on spindle thermal error compensation in machine tools [J]. International Journal of Machine Tools and Manufacture, 2015, 95:20-38. Li Yang; Zhao Wanhua*; Lan Shuhuai; Ni Jun; Wu Wenwu; Lu bingheng.

11.   Dynamic electromechanical coupling resulting from the air-gap fluctuation of the linear motor in machine tools [J]. International Journal of Machine Tools and Manufacture, 2015, 94:100-108. Yang xiaojun; Lu dun; Zhang Jun; Zhao Wanhua*.

12.   The effect of axis coupling on machine tool dynamics determined by tool deviation [J]. International Journal of Machine Tools and Manufacture, 2015, 88:71-81. Wang Lei, Liu Haitao, Yang Lei, Zhang Jun, Zhao Wanhua*, Lu Bingheng.

13.   Prediction of the effect of speed on motion errors in hydrostatic guideways [J]. International Journal of Machine Tools and Manufacture, 2013, 64:78-84. Wang zhiwei; Zhao Wanhua*; Cheng yaolong; Lu bingheng.

14.   Cage Speed of Hydrodynamic Rolling Hybrid Bearings [J]. Tribology Letters, 2013, 51(3): 303-309. Lu Dun*, Zhao Wanhua, Lu Bingheng, Zhang Jun.

15.   Static characteristics of a new hydrodynamic–rolling hybrid bearing [J]. Tribology International, 2012, 48: 87-92. Lu Dun*, Zhao Wanhua, Lu Bingheng, Zhang Jun.

16.   General calibration method of cutter runout and cutting force coefficients for flat-end cutter and its using for cutting force prediction during peripheral milling [J]. Journal of Manufacturing Science and Engineering. 2017. Zhang Xing, Zhang Wei, Zhang Jun*, Pang Bo, Wanhua Zhao.

17.   Tool Path Generation for Turbine Blades Machining With Twin Tool [J]. Journal of Manufacturing Science and Engineering, 2017, 139(11): 111015. Lu Dun*, Liu Jun, Zhao Wanhua, Lu Bingheng, Wu Diaodiao, Song Dongdong, Xue Fei, Cheng Bing.

18.   Numerical study of microstructural effects on chip formation in high speed cutting of ductile iron with discrete element method [J]. Journal of Materials Processing Technology, 2017, 249: 291-301. He Yong, zhang Jun*, Qi Yutong, Liu Hongguang, Afaque R. Memon, Zhao Wanhua.

 

19.   Rapid dynamics prediction of tool point for bi-rotary head five-axis machine tool [J]. Precision Engineering, 2017, 48: 203-215. Zhang Jun*, Li Jianhui, Xie Zhennan, Du Chao, Gui Liang, Zhao Wanhua.

20.   A non-contact calibration method for cutter runout with spindle speed dependent effect and analysis of its influence on milling process [J]. Precision Engineering, 2017. Zhang Xing, Zhang Jun*, Zhang Wei, Li Jianhui, Zhao Wanhua.

21.   Boundary conditions optimization of spindle thermal error analysis and thermal key points selection based on inverse heat conduction [J]. The International Journal of Advanced Manufacturing Technology, 2017: 1-10. Li Yang, Zhao Wanhua*, Wu Wenwu, Lu Bingheng.

22.   Effect of microstructure evolution on chip formation and fracture during high-speed cutting of single phase metals [J]. The International Journal of Advanced Manufacturing Technology, 2017, 91(1-4): 823-833. Liu Hongguang, Zhang Jun*, Xu Xiang, Jiang Yifei, HeYong, Wanhua Zhao.

23.   Effect of the screw–nut joint stiffness on the position-dependent dynamics of a vertical ball screw feed system without counter weight [J]. Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, 2017. Cunfan Zou, Huijie Zhang, Dun Lu, Jun Zhang, Wanhua Zhao*.

24.   An efficient approach for milling dynamics modeling and analysis with varying time delay and cutter runout effect [J]. International Journal of Advanced Manufacturing Technology, 2016, 87:3373-3388. Zhang Xing, Zhang Jun*, Pang Bo, Wu Diaodiao, Zheng Xiaowei, Zhao Wanhua.

25.   A new method for cutting force prediction in peripheral milling of complex curved surface [J]. International Journal of Advanced Manufacturing Technology, 2016, 86:117-128. Zhang Xing, Zhang Jun*, Zhao Wanhua.

26.   Assembly errors analysis of linear axis of CNC machine tool considering component deformation [J]. The International Journal of Advanced Manufacturing Technology, 2016, 86:281-289. Ma Junxu; Lu Dun; Zhang Jun; Zhao Wanhua*.

27.   A zero phase error tracking based path precompensation method for high-speed machining [J]. Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, 2016, 230:230-239. Li Xuewei, Zhang Jun, Zhao Wanhua*, Lu Bingheng.

28.   Dynamic modeling and analysis for gantry-type machine tools considering the effect of axis coupling force on the slider–guide joints’ stiffness [J]. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, 2016. Zhang Huijie*; Zhao Wanhua; Du Chao; Liu Hui; Zhang Jun.

29.   Analysis on steady-state vibration induced by backlash in machine tool rotary table [J]. Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science.2016.231: 4163-4171.Yang Xiao, Lu Dun, Zhang Jun, Zhao Wanhua*.

30.   A parametric modeling method for the pose-dependent dynamics of bi-rotary milling head [J]. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture. 2016. Du Chao, Zhang Jun, Lu Dun, Zhang Huijie, Zhao Wanhua*.

31.   Influence of strut cross-section of stents on local hemodynamics in stented arteries [J]. Chinese Journal of Mechanical Engineering (English Edition),2016,29:624-632. Jiang, Yongfei, Zhang, Jun, Zhao, Wanhua*.

32.   Variable dimensional chain of stroke related mechanical assemblies [J]. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, 2016, 230:909-922. Hu Min, Ma Junxu, Zhao Wanhua*.

33.   Thermal error modeling of the spindle based on multiple variables for the precision machine tool [J]. The International Journal of Advanced Manufacturing Technology, 2014, 72:1415-1427. Li Yang; Zhao Wanhua*; Wu Wenwu; Lu Bingheng; Yubao Chen.

34.   Dynamic modeling and analysis of the high-speed ball screw feed system [J]. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, 2015, 229(5): 870-877. Zhang Huijie, Zhang Jun, Liu Hui, Liang Tao; Zhao Wanhua*.

35.   Analysis of position-dependent dynamic characteristics for machine tools using a variable-coefficient linear model [J]. Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, 2014, 228(15): 2690-2701. Liu Haitao*, Wang Lei, Zhao Wanhua.

36.   Effect of tilting angle on the dynamics of tilting table driven by worm and worm wheel [J]. Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, 2015, 229:1782-1791. Wei wenming; Lu dun; Zhang Jun; Zhao Wanhua*.

37.   Effects of the inlet conditions and blood models on accurate prediction of hemodynamics in the stented coronary arteries [J]. AIP ADVANCES, 2015, 5(5): 057109. Jiang Yongfei; Zhang Jun; Zhao Wanhua*.

38.   The maximum dynamic eccentricity ratio of hydrodynamic rolling hybrid bearing [J]. Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology, 2015, 229:168-177. Lu Dun*, Zhao Wanhua, Lu Bingheng, zhang jun.

39.   Effects of Rolling Bearing Type and Size on the Maximum Eccentricity Ratio of Hydrodynamic Rolling Hybrid Bearings [J]. Tribology Transactions, 2014, 57(2): 225-229. Lu Dun*, Zhao Wanhua, Lu Bingheng, zhang jun.

40.   Analysis and Modeling for Flexible Joint Interfaces under Micro and Macro Scale [J]. Precision Engineering, 2013, 37(4): 817-824. Wang Lei, Liu Haitao*, Jun Zhang, Zhao Wanhua.

41.   Research on error averaging effect of hydrostatic guideways[J]. Precision Engineering, 2012, 36(1): 84-90. Xue Fei; Zhao Wanhua*; Chen Yaolong; Wang Zhiwei.

42.   The Maximum Allowable Misalignment in Hydrodynamic Rolling Hybrid Bearings [J]. Journal of Engineering for Gas Turbines and Power, 2014, 136(8): 082501. . Lu Dun*, Zhao Wanhua, Lu Bingheng, Zhang Jun.

43.   Discrete Element Simulation of the Stress Wave in High Speed Milling[C]. ASME 2017 12th International Manufacturing Science and Engineering Conference collocated with the JSME, Jiang Yifei, Zhang Jun*, He Yong, Liu Hongguang, Afaque Rafique Memon, Wanhua Zhao.

44.   Tool orientation optimization of 5-axis ball-end milling based on an accurate cutter/workpiece engagement model [J]. CIRP Journal of Manufacturing Science and Technology, 2017. Zhang Xing, Zhang Jun*, Zheng Xiaowei, Pang Bo, Zhao Wanhua.

45.   Pose-dependent dynamic modeling and analysis of bi-rotary milling head[C]. ASME 2016 11th International Manufacturing Science and Engineering Conference. Du Chao, Lu Dun, Zhang Jun, Zhang Huijie, Zhao Wanhua*.

46.   Investigation on Morphological Evolution of Chips for Ti6Al4V Alloys with the Increasing Milling Speed[C]. Procedia CIRP. 2016, 46:408-411. Liu Hongguang, Zhang Jun*, Jiang Yifei, He Yong, Xu Xiang, Zhao Wanhua.

47.   Discrete element simulation of machining cracks in brittle materials during high speed cutting[C]. Materials Science Forum 2016, 836-837:117-125. He Yong, Zhang Jun*, Jiang Yifei, Liu Hongguang, Zhao Wanhua.

48.   A novel evaluation method on the precision of linear motor feed system in high-speed machine tools[C]. Materials Science Forum 2016, 836-837:220-227. Yang Xiaojun, Li Yan, Ma Chengfang, Lu Dun, Zhang Jun, Zhao Wanhua*.

49.   The analysis and optimization of machining precision based on electromechanical matching in high-speed machine tools[C]. Materials Science Forum 2016, 836-837:584-591. Yang Xiaojun, Ma Chengfang, Li Yan, Lu Dun, Zhang Jun, Zhao Wanhua*.

50.   Research on the modeling of dynamics for vertical axis ball screw feed system[C]. IEEE/ISAM 2013 International Symposium on Assembly and Manufacturing. 2013, 208-213. Zhang Huijie; Zhao Wanhua*; Zhang Jun; Liu Haitao.

51.   Modeling and analysis of the variation facts of dynamic characteristics of the feed system[C]. IEEE/ISAM 2013 International Symposium on Assembly and Manufacturing. 2013, 362-364. Yang Xiaojun; Zhao Wanhua*;Liu Hui;Wang Lei;Liang Tao.

 

52.   A novel methodology on the state estimation of the machine tools based on the multi-sensor information fusion in time-frequency space[C]. IEEE/ISAM 2013 International Symposium on Assembly and Manufacturing. 2013, 352-356. Huang Ying; Zhao Wanhua*;Lu Bingheng.

53.   An Overall Analysis of Servo Control System Influence on Frequency Spectrum Structure of Linear Motor Thrust[C]. ASME 2012 International Mechanical Engineering Congress and Exposition, American Society of Mechanical Engineers, 2012: 121-130. Yang Xiaojun, Cao Kun, Liu Hui, Zhao Wanhua* and Zhang Jun.

54.   A Novel Acceleration/Deceleration Control Algorithm for High Precision Feed Motion System[C]. ASME 2012 International Mechanical Engineering Congress and Exposition, American Society of Mechanical Engineers, 2012: 277-282. Cao Kun, Zhao Wanhua*, Liu Hui, Yang Xiaojun and Zhang Jun.

55.   Research on Mechatronic Coupling Facts of Linear Motor Feed Drive System Based on Spectrum Characteristics[C]. ASME 2012 International Mechanical Engineering Congress and Exposition, American Society of Mechanical Engineers, 2012: 895-903. Liu Hui, Yang XiaoJun, Zhang Huijie, Zhao Wanhua*,Zhang Jun and Cao Kun.

56.   Receptance coupling for tool point dynamics prediction on machine tools[J]. Chinese Journal of Mechanical Engineering (English Edition),2011,24:340-345. Zhang Jun, Schmitz Tony, Zhao Wanhua*, Lu Bingheng.

57.   Structural optimization of labyrinth-channel emitters based on hydraulic and anti-clogging performances[J]. Irrigation Science,2011,29:351-357. Zhang Jun, Zhao Wanhua, Tang Yiping, Lu Bingheng.

58.   Anti-clogging performance evaluation and parameterized design of emitters with labyrinth channels[J]. Computers and Electronics in Agriculture,2010,74:59-65. Zhang Jun, Zhao Wanhua, Tang Yiping, Lu Bingheng.

59.   Numerical and experimental study on hydraulic performance of emitters with arc labyrinth channels[J]. Computers and Electronics in Agriculture,2007,56:120-129. Zhang Jun, Zhao Wanhua, Wei Zhengying, Tang Yiping, Lu Bingheng.

60.   Development of a high-resolution rapid prototyping system for small size objects[J]. International Journal of Advanced Manufacturing Technology,2007,1:941-947. Xu Guangshen, Zhao Wanhua, Tang Yiping, Lu Bingheng.

61.   Investigation of the overlapping parameters of MPAW-based rapid prototyping[J]. Rapid Prototyping Journal, 2006, 12:165-172. Wurikaixi Aiyiti, Zhao Wanhua, Lu Bingheng, Tang Yiping.

62.   Novel stereolithography system for small size objects[J]. Rapid Prototyping Journal,2006,12:12-17. Xu Guangshen, Zhao Wanhua, Tang Yiping, Lu Bingheng.

63.   Feature extraction of bones and skin based on ultrasonic scanning[J]. Chinese Journal of Mechanical Engineering (English Edition), 2005,18:510-514. Zheng Shuxian, Zhao Wanhua, Lu Bingheng, Zhao Zhao.

64.   A novel stereolithography technology with conventional UV light [J]. Rapid Prototyping Journal,2001,7:268-274. Wu Maoliang, Zhao Wanhua, Tang Yiping, Li Dichen, Lu Bingheng.

65.   Axial thermal error compensation method for the spindle of a precision horizontal machining center. IEEE International Conference on Mechatronics and Automation, 2012:2319-2323. Li Yang, Zhao Wanhua.

66.   Research on the cutting fluid effect on cutting force and surface roughness in rotor milling. Materials Science Forum 2012, 723:50-55. Wang Jianlu, Wu Liangliang, Zhang Jun, Zhao Wanhua, Jiang Yifei, Shui Yan.

67.   Influencing factors on dynamic response of hydrostatic guideways. Advanced Materials Research 2012,418-420: 2095-2101. Wang Zhiwei, Zhao Wanhua, Lu Bingheng.

68.   A zero wear assembly of a hydrodynamic bearing and a rolling bearing. IEEE International Symposium on Assembly and Manufacturing, ISAM 2011:1-4. Lu Dun, Zhao Wanhua, Lu Bingheng, Zhang Jun.

69.   An error compensation method for multi-axis machining based on the actual contour measurement. IEEE International Symposium on Assembly and Manufacturing, ISAM 2011:1-5 Li Xuewei, Cao Kun, Zhao Wanhua, Lu Bingheng, Zhang Jun.

70.   Fluid-structure interactions (FSI) on static characteristics of hydrostatic guideways. IEEE International Symposium on Assembly and Manufacturing, ISAM 2011:1-5. Wang Zhiwei, Zhao Wanhua, Li Bingqiang, Zhang Jun, Lu Bingheng.

71.   Research on dual-driving synchronous control system modeling of gantry-type machine tools with traveling bridge.  IEEE International Symposium on Assembly and Manufacturing, ISAM 2011:4:021. Li Yuxia, Zhao Wanhua, Cheng Yao, Zhang Jun, Yang Qingyu.

72.   Modal analysis of machine tools during working process by matrix perturbation method. IEEE International Symposium on Assembly and Manufacturing, ISAM 2011:1-4. Liu Haitao, Zhao Wanhua, Zhang Jun, Wang Lei, Ma Xiaobo, Zhao Feng.

73.   Influences of moisture expansion on motion errors of granite hydrostatic guideways. Advanced Materials Research 2011,189-193:4339-4345. Xue Fei, Zhao Wanhua, Cheng Yaolong.

74.   Contact analysis for joint interfaces of machine tools based on a 3-D anisotropic asperity model. Advanced Materials Research 2011, 189-193:114-120. Liu Haitao, Zhao Wanhua, Zhang Jun.

75.   Research on transitional flow characteristics of labyrinthchannel emitter. International Federation for Information Processing 2009, 294:881-890. Zhao Wanhua, Zhang Jun, Tang Yiping, Wei Zhengying, Lu Bingheng.

76.   Study on the process parameters of MPAW-based rapid prototyping Key Engineering Materials 2007,353-358: 1931-1934. Wurikaixi Aiyiti, Zhao Wanhua, Tang Yiping, Lu Bingheng.

77.   面向双刀加工的中长型叶片型面轨迹规划方法.机械工程学报,2016, 11:140-145.刘军,张俊,赵万华*,卢秉恒.

78.   超密齿面铣刀的铣削力波动特性及其影响分析. 东北大学学报(自然科学版). 张俊*,王拓,张星,赵万华.

79.   低频伺服力激励下进给系统建模与动态响应分析. 机械工程学报, 2015, 51(3): 18-28. 王磊, 刘海涛, 梁滔, 马晓波,赵万华*.

80.   轴间耦合下多轴联动机床的位置维动态特性分析. 机械工程学报, 2014, 50(15): 89-96. 王磊, 刘海涛, 杨啸, 张俊, 赵万华*.

81.   变姿态下摆台多支承轴系轴承刚度的计算方法. 华中科技大学学报. 2015,48(10). 位文明, 吕盾, 张俊, 赵万华*.

82.   面向运动平稳性的直线电机推力频谱特征分析. 西安交通大学学报, 2015,49(8). 马成方,杨晓君,张俊,吕盾,赵万华*.

83.   无平衡重的竖直轴进给系统动态特性变化规律研究. 机械工程学报, 2014, 50(7): 176-183. 张会杰, 刘辉, 杜超, 张俊, 赵万华*.

84.   转台轴承静刚度建模及其影响因素分析. 西安交通大学学报, 2014, 48(12): 8-14. 位文明, 吕盾, 张俊, 赵万华*.

85.   考虑模态特性的高速机床进给系统刚度匹配研究. 西安交通大学学报, 2014, 48(1): 90-95. 刘海涛, 王磊, 赵万华*.

86.   多因素耦合条件下数控机床进给系统负载惯量比的综合分析与设计. 机械工程学报, 2014, 50(9): 108-113. 刘辉, 黄莹, 赵万华*, 卢秉恒.

87.   数控机床基础大件精度保持性研究. 西安交通大学学报, 2014, 48(6): 65-73. 胡敏, 余常武, 张俊, 赵万华*, 寸花英, 袁胜万.

88.   高速高加速度下的进给系统机电耦合. 机械工程学报, 2013, 49(6): 2-11. 卢秉恒, 赵万华*, 张俊, 杨晓君, 王磊, 张会杰, 张星.

89.   一种机床固定结合面形状的拓扑设计方法. 振动工程学报, 2014, 27(4): 481-487. 王磊; 刘海涛; 金涛; 杜瑞; 赵万华*.

90.   考虑负载变化的机床传动系统时变动特性研究. 振动与冲击, 2014, 33(9): 173-178. 张会杰; 刘海涛; 张俊; 赵万华*.

91.   流固耦合对油静压导轨动静特性的影响. 机械工程学报, 2014, 50(9): 148-152. 王智伟; 查俊; 陈耀龙; 赵万华*.

92.   主轴转子系统动力学解析建模方法. 机械工程学报, 2013, 49(6): 44-51. 赵万华*; 杜超; 张俊; 刘海涛.

93.   面向动态特性快速求解的铣刀等效建模方法. 振动工程学报, 2013, 26(3): 351-356. 张俊; 黄保华; 赵万华; 刘春时; 卢秉恒.

94.   螺钉连接固定结合面匹配设计研究. 西安交通大学学报, 2013, 47(7): 62-67. 王磊; 杜瑞; 金涛; 刘海涛; 牛敬; 赵万华*.

95.   直线电机进给系统机械系统动态特性研究. 西安交通大学学报, 2013, 47(4): 44-50. 杨晓君; 赵万华*; 刘辉; 张会杰.

96.   汽轮机长叶片型面双刀加工刀位轨迹优化算法. 西安交通大学学报, 2013, 47(9): 65-71. 王建录; 成冰; 赵万华*; 卢秉恒..

97.   动梁式龙门机床双轴同步系统的模型建立及不同步误差分析. 机械工程学报, 2013, 49(13): 174-182. 程瑶; 梁滔; 赵万华*.

98.   汽轮机长叶片型面双刀加工刀位轨迹优化算法[J].西安交通大学学报,2013, 09:65-71. 王建录,成冰,赵万华,卢秉恒.

99.   轨迹误差建模的多轴联动机床轮廓误差补偿技术[J].西安交通大学学报,2012, 03:47-52. 李学伟,赵万华,卢秉恒.

100.  动梁式龙门机床的双驱同步控制系统建模[J].西安交通大学学报,2012, 04:119-124. 李玉霞,赵万华,程瑶,张俊,杨清宇.

101.  整体立铣刀动力学模型的最优等效方法[J].华中科技大学学报(自然科学版),2012, S2:17-20. 张俊,黄保华,赵万华,刘春时,卢秉恒.

102.  基于结合面的机床摄动分析及优化设计[J].西安交通大学学报,2010, 01:96-99. 刘海涛,赵万华. 

103.  基于广义加工空间概念的机床动态特性分析[J].机械工程学报,2010, 21:54-60. 刘海涛,赵万华.

104.  静压导轨误差均化效应影响因素研究[J].西安交通大学学报,2010, 11:33-36. 薛飞,赵万华.

105.  基于计算流体动力学的迷宫型灌水器流量预测[J].机械工程学报,2007, 04:159-162. 张俊,赵万华,醋强一,唐一平,卢秉恒.

106.  动态优化刮刀速度的新型涂层工艺[J].机械工程学报,2007, 07:1-5. 胥光申,赵万华,卢秉恒.

107.  电子束熔融直接金属成型工艺的研究[J].西安交通大学学报,2007, 11:1307-1310+1325. 刘海涛,赵万华,唐一平.

108.  基于正交试验的迷宫流道灌水器参数化设计研究[J].西安交通大学学报,2006, 01:31-35. 张俊,洪军,赵万华,卢秉恒.

109.  基于微束等离子焊的快速成形中成形参数的优化[J].西安交通大学学报,2006, 05:568-572. 乌日开西.艾依提,赵万华,卢秉恒.

110.  基于脉冲微束等离子弧焊的快速成形中的搭接参数[J].机械工程学报,2006, 05:192-197. 乌日开西•艾依提,赵万华,卢秉恒,孙磊.

111.  残肢与接受腔的三维有限元动态分析[J].西安交通大学学报,2006, 07:807-810. 郑淑贤,赵万华,卢秉恒.

112.  用高分辨率快速成形系统制作细微结构[J].机械工程学报,2005, 09:82-85. 胥光申,赵万华,卢秉恒.

113.  高分辨率快速成型系统的光固化实验研究[J].西安交通大学学报,2005, 01:66-69. 胥光申,赵万华,卢秉恒.

114.  高分辨率激光快速成形系统研究与开发[J].机械工程学报,2005, 02:127-131. 胥光申,邓攀,赵万华,卢秉恒.

115.  基于反求工程的个性化残肢重建方法的研究[J].机械工程学报,2004, 07:128-131. 郑淑贤,赵万华,卢秉恒,陈明侠.

116.  滴灌滴头内流场的数值模拟及流道优化设计[J].西安交通大学学报,2004, 09:920-924. 孟桂祥,张鸣远,赵万华,卢勇.

117.  基于快速成形技术滴头的结构试验研究[J].西安交通大学学报,2003, 05:542-545. 王瑞环,赵万华,杨来侠,唐一平,卢秉恒.

118.  光固化快速成型树脂涂层厚度的研究[J].西安交通大学学报,2002, 01:47-50. 吴懋亮,赵万华,李涤尘,卢秉恒.

119.  基于有限元的光固化快速成形中零件变形研究[J].机械工程学报,2002, 05:47-51. 赵万华,李涤尘,卢秉恒.

120.  光固化快速成型中零件变形机理的研究[J].西安交通大学学报,2001, 07:705-708+713. 赵万华,李涤尘,卢秉恒.

专利

1.       赵万华,王磊,杨磊,卢秉恒.一种机床参数及其区间变化范围的主动设计方法[P].中国:CN105808826A,2016-07-27.

2.       张俊,赵万华,何勇,蒋逸飞,刘弘光.一种高速铣削过程中应力波效应的分析方法[P].中国:CN105550485A,2016-05-04.

3.       张俊,赵万华,曹洪勇,吕盾,胡敏.一种重型机床床身变形自动监测与报警装置[P].中国:CN105511402A,2016-04-20.

4.       赵万华,张星,张俊,庞博,张会杰.一种螺旋铣刀五轴加工铣削力精确预测方法[P].中国:CN105426697A,2016-03-23.

5.       赵万华,张俊,刘严,刘辉,谢振南,蔺伟兴.基于刚度辨识的数控机床进给系统控制参数优化方法[P].中国:CN104898568A,2015-09-09.

6.       赵万华,张俊,李林雪,杜洋洋,蔺伟兴,李玉霞.基于统计模型的动梁式龙门机床双驱进给误差补偿方法及模型[P].中国:CN104865894A,2015-08-26.

7.       赵万华,张俊,胡敏,马军旭,吕盾.一种机床地脚螺栓布局的优化方法[P].中国:CN104794280A,2015-07-22.

8.       赵万华,张俊,胡敏,马军旭,吕盾.一种微圆弧横梁导轨面的设计方法[P].中国:CN104794279A,2015-07-22.

9.       张俊,赵万华,谢振南,王俊娜,刘严,蔺伟兴.单摆头结构铣床刀尖点频响的快速计算方法[P].中国:CN104732088A,2015-06-24.

10.   张俊,赵万华,谢振南,王俊娜.双摆头结构铣床刀尖点频响的快速计算方法[P].中国:CN104715155A,2015-06-17.

11.   张俊,赵万华,李博.半闭环控制数控机床滚珠丝杠进给系统定位误差建模方法[P].中国:CN104483900A,2015-04-01.

12.   赵万华,张俊,庞博,张星,王超.面向非平面细长类型材加工的自适应联动夹紧装置及方法[P].中国:CN104289924A,2015-01-21.

13.   赵万华,张俊,蒋逸飞,刘弘光,何勇.一种立式车铣复合加工实验台[P].中国:CN104128797A,2014-11-05.

14.   张俊,赵万华,高博,蒋逸飞,卢秉恒.一种超密齿面铣刀及其设计方法[P].中国:CN103331473A,2013-10-02.

15.   赵万华,李旸,位文明,寸花英.一种精密卧式加工中心主轴热误差补偿方法[P].中国:CN102658499A,2012-09-12.

16.   张俊,黄保华,金涛,赵万华,卢秉恒.一种频响特性快速获取的铣刀等效模型建立方法[P].中国:CN102581701A,2012-07-18.

17.   赵万华,余常武,谢瑛,郭宝安.一种可密封液固两相的间隙密封结构[P].中国:CN102518800A,2012-06-27.

18.   赵万华,王磊,金涛,张俊,杜瑞,陈长胜.一种超重型机床的工件支持系统[P].中国:CN102179706A,2011-09-14.

19.   张俊,赵万华,秋晨,卢秉恒.一种切削加工中进给速度的优化方法[P].中国:CN102184276A,2011-09-14.

20.   赵万华,王磊,周军勇,金涛,张俊,陈长胜.一种用于安装刀塔的滑移台装置[P].中国:CN102166718A,2011-08-31.

21.   赵万华,王磊,彭哓辉,金涛,张俊,陈长胜.一种轻质量高承载的机床支撑结构[P].中国:CN102152130A,2011-08-17.

22.   赵万华,位文明,董襄阳,余常武,卢秉恒.汽轮机长叶片型面的双刀头式加工的刀具轨迹生成方法[P].中国:CN102096391A,2011-06-15.

23.   赵万华,杨清宇,李玉霞,程瑶,何仲云.动梁式龙门机床双驱同步机电耦合特性的建模方法[P].中国:CN102059573A,2011-05-18.

24.   张俊,赵万华,卢秉恒.一种高速铣削稳定性快速判定方法[P].中国:CN101905340A,2010-12-08.

25.   赵万华,陈耀龙,何仲赟,薛飞,位文明,卢秉恒.一种闭式静压导轨[P].中国:CN101829904A,2010-09-15.

26.   陈耀龙,何仲赟,赵万华,薛飞,位文明,卢秉恒.双驱动静压数控摆头[P].中国:CN101829907A,2010-09-15.

27.   陈耀龙,何仲赟,赵万华,薛飞,位文明,卢秉恒.无轴高精度静压数控回转工作台[P].中国:CN101829909A,2010-09-15.

28.   赵万华,陈耀龙,何仲赟,薛飞,位文明,卢秉恒.一种无摩擦平衡油缸[P].中国:CN101832307A,2010-09-15.

29.   赵万华,陈耀龙,何仲赟,王智伟,薛飞,卢秉恒.环形缝隙节流器[P].中国:CN101832340A,2010-09-15.

30.   赵万华,徐华,张永领,马石磊.一种采用水润滑动静压轴承的高速电主轴装置[P].中国:CN101564770,2009-10-28.

31.   赵万华,张俊,云霞,卢秉恒.面向血管支架结构设计的血液流动特性测试装置[P].中国:CN101347360,2009-01-21.

32.   赵万华,刘海涛,卢秉恒,卢天健.一种动梁式龙门机床复合结构横梁[P].中国:CN101181776,2008-05-21.

33.   赵万华,张俊,卢秉恒.一种微尺度迷宫型单元流道水力性能测试方法[P].中国:CN101082535,2007-12-05.

34.   赵万华,张俊,卢秉恒.微尺度迷宫型单元流道水力性能测试装置[P].中国:CN101082536,2007-12-05.

35.   赵万华,薛飞,李涤尘,陈烽.飞秒激光真三维微纳加工中心[P].中国:CN1947917,2007-04-18

36.   赵万华,卢秉恒,郑淑娴,范晓逶.基于超声波测量的残肢骨骼与皮肤特征的提取方法[P].中国:CN1608589,2005-04-27.

37.   赵万华,卢秉恒,胥光申,张锡强.一种用于光固化快速成型工艺的树脂涂层装置[P].中国:CN1603095,2005-04-06.

38.   赵万华,卢秉恒,张俊,魏正英.微尺度迷宫型单元流道的制造及水力性能测试方法和装置[P].中国:CN1603771,2005-04-06.

39.   赵万华,卢秉恒,郑淑娴,范晓逶.假肢残端外形及骨骼超声波测量方法及装置[P].中国:CN1528242,2004-09-15.

40.   赵万华,卢秉恒,胡晓冬,许超.基于焊接堆积的多金属直接快速成型方法及装置[P].中国:CN1481972,2004-03-17.

41.   赵万华,魏正英,王素琴,唐一平,卢秉恒.一种微灌灌水器抗菌材料的制备工艺[P].中国:CN1454472,2003-11-12.

42.   赵万华,魏正英,唐一平,卢秉恒,李涤尘.温度自调节微灌灌水器[P].中国:CN1366806,2002-09-04.

软件著作权

1.       赵万华, 张俊, 李翔宇, 位文明, 吕盾. 回转轴几何精度与动态性能分析系统.登记日期:20150131,登记号:2015SRD19112.

2.       赵万华, 张会杰, 刘辉, 杜超, 马军旭, 张俊, 吕盾. 高加速度下滚珠丝杠进给系统动特性分析软.登记日期:20140311,登记号:2014SR028926.

3.       赵万华,杜超,张会杰,吕盾,张俊,金涛.偏置式双摆角铣头动态特性分析及优化系统,登记日期:20141105,登记号:2014SR169191.

4.       赵万华, 杜超, 吕盾, 张俊, 金涛. 交叉滚子轴承动力学性能计算软件, 登记日期:20141105,登记号:2014SR169194.

5.       赵万华, 杜超, 位文明, 谢振南, 张俊, 吕盾.摆叉式双摆角铣头动态特性分析及优化系统, 登记日期:20141105,登记号:2014SR169306.

6.       赵万华, 刘严, 李燕, 刘辉, 刘三利.数控机床进给系统机械参数辨识与控制参数优化软件, 登记日期:20140626,登记号: 2014SR086122.

7.       赵万华, 位文明, 李翔宇. 蜗轮蜗杆副传动转台/摆轴动特性分析及优化系统, 登记日期:20140903,登记号: 2014SR132530.

8.       赵万华, 刘军, 张星, 潘天航. 汽轮机叶片加工参数查询与优化系统, 登记日期:20140929,登记号: 2014SR145574.

9.       赵万华, 胡敏,余常武. 振动时效参数优化软件. 登记日期:20140902,登记号:  2013SR093764.

10.   赵万华,刘海涛,杜瑞,王磊. 螺栓(钉)固定结合部刚度计算分析软件. 登记日期:20130411,登记号:2013SR033266.

11.   赵万华,刘海涛,杜瑞,王磊.螺栓(钉)结合部结构设计校核软件. 登记日期:20130411,登记号:2013SR033264.

12.   赵万华,刘海涛,王磊,张会杰,杜超,杜瑞. 机床立柱横梁类部件动态设计系统. 登记日期:20131223,登记号:2013SR154283.

13.   赵万华,位文明,李旸,陈耀龙;精密卧式加工中心主轴轴向热误差补偿数据生成系统. 登记日期:20120512,登记号:2012SR038153.

14.   赵万华, 胡敏. 导轨安装面设计软件. 登记日期:20121116,登记号:2012SR110185.

15.   赵万华,杜超,黄保华,张俊,金涛。铣削电主轴系统动力学性能有限元分析软件V1.0。登记日期:20121116,登记号:2012SR110147。

16.   张俊、黄保华、杜超、张星、赵万华;数控铣床切削稳定性判定系统软件。登记日期:20121116,登记号:2012SR110178。

联系方式
电子邮箱:whzhao@mail.xjtu.edu.cn
联系电话:029-83399520,13609112346
联系地址:雁塔区雁翔路交大曲江校区西5楼北楼A315室
更新日期:2017-12-16