![]() |
王富 |
1. 3D打印快速成形技术
2. 定向凝固技术
3. 轻质金属成型工艺
王富,出生于1982年,2015年毕业于德国亚琛工业大学(RWTH Aachen University)。王富教授的主要研究兴趣集中在先进航空发动机和燃气轮机用空心叶片领域的研究(传统精密铸造方法和3D打印快速成形技术),包括单晶、定向和等轴晶叶片的制备工艺开发和优化、缺陷控制、质量优化及其高温合金的成分设计和优化,在德国工作期间为德国亚琛工业大学铸造研究所高温合金定向凝固和叶片制造技术方向的负责人。现为德国亚琛工业大学铸造研究所客座研究员。先后主持和参与3项德国科研基金会(DFG)项目、撰写1项DFG项目及7项企业合作项目,在Metall. Mater. Trans. A,J. Mater. Process. Technol.和J. Cryst. Growth等国际顶级冶金工程学术期刊上发表过25篇高质量文章,获批9项专利。是本领域多个国际知名SCI期刊的审稿专家。
201109-201508 德国 德国亚琛工业大学 冶金和材料科学 博士
201509-201804 德国 德国亚琛工业大学铸造研究所 研究员(研究组负责人)
201804-至今 中国 西安交通大学 教授
在研项目:
1.西安交通大学青年拔尖人才项目
2.机械制造系统工程国家重点实验室青年基金研究项目
代表性论文:
1.Fu Wang, et al. Effect of local cooling rates on the microstructures of single crystal CMSX-6 superalloy: A comparative assessment of the Bridgman and the downward directional solidification processes. J. Alloy. Compd. 616 (2014) 102-9.
2.Fu Wang, et al. Investigation of segregation and density profiles in the mushy zone of CMSX-4 superalloys solidified during downward and upward directional solidification processes. J. Alloy. Compd. 620 (2015) 24-30.
3.Fu Wang, et al. Comparative study of the segregation behavior and crystallographic orientation in a nickel-based single-crystal superalloy. J. Alloy. Compd. 647 (2015) 528-32.
4.Fu Wang, et al. Solidification behavior of a Ni-based single crystal CMSX-4 superalloy solidified by downward directional solidification process. Mater. Charact. 101 (2015) 20-5.
5.Fu Wang, et al. Microsegregation behavior of alloying elements in single-crystal nickel-based superalloys with emphasis on dendritic structure. Mater. Charact. 127 (2017) 311-16.
6.Fu Wang, et al. A high thermal gradient directional solidification method for growing superalloy single crystals. J. Mater. Process. Technol. 214 (2014) 3112-21.
7.Fu Wang, et al. Preferred growth orientation and microsegregation behaviors of eutectic in a nickel-based single-crystal superalloy. Sci. Technol. Adv. Mat. 16 (2015) 025004.
8.Fu Wang, et al. Preparation of inoculants used in superalloy and analysis of the atomic matching models. J. Mater. Sci. Technol. 29 (2013) 387-92.
9.Fu Wang, et al. Comparative investigation of the downward and upward directionally solidified single-crystal blades of superalloy CMSX-4. Metall. Mater. Trans. A 47 (2016) 2376-86.
10.Fu Wang, et al. Influence of processing parameters on the solidification behavior of single-crystal CMSX-4 superalloy. Metall. Mater. Trans. A 47 (2016) 3703-12.
11.Fu Wang, et al. Eutectic formation during solidification of Ni-based single crystal superalloys with additional carbon. Metall. Mater. Trans. A. 48 (2017) 5442-48.
12.Fu Wang, et al. Three-dimensional dendrite growth within the shrouds of single crystal blades of a nickel-based superalloy. Metall. Mater. Trans A. 48 (2017) 5924-39.
13.Fu Wang, et al. Influence of the size effect on the microstructures of the DWDS- and Bridgman-solidified single-crystal CMSX-4 superalloy. Metall. Mater. Trans. B 47 (2016) 76-84.
14.Fu Wang, et al. Effect of melt superheat on microstructure of Al4Fe2Mn1.5 Monel alloy. Trans. Nonferrous Met. Soc. China, 19 (2009) 19-25.
15.Fu Wang, et al. Effect of solidification parameters on the microstructures of superalloy CMSX-6 formed during the downward directional solidification process. J. Cryst. Growth. 389 (2014) 47-54.
16.Fu Wang, et al. Effect of directional solidification variables on the microstructures of single-crystal turbine blades of nickel-based superalloy. Adv. Eng. Mater. 2017, 1700297.
17.Fu Wang, et al. Microstructural evolution of aluminium-copper alloys during the downward directional solidification process. Int. J. Mater. Res. 105 (2014) 168-76.
代表性专利:
1. 一种医用钛合金小规格棒材的热处理方法ZL200910310715.6
2.外科植入物用tc20钛合金小规格棒材的制备方法ZL200910254551.X
3. Z型圆柱体选晶器ZL201720266984.7
4. C型圆柱体选晶器ZL201720266938.7
5. 生产Z型选晶器的模具ZL201720263984.1
6. 生产C型选晶器的模具ZL201720263983.7
7. 螺旋型选晶器ZL201720266917.5
英文专著:
Microstructural investigation of downward directionally solidified single crystal superalloys.